Sweet Corn Husker and Thresher Machine

A sweet corn husker and thresher machine prepares fresh corn for canning, freezing or kernel packing: husking above 95%, then whole-kernel threshing.

Feature

  1. Husking rate above 95% with low kernel damage.
  2. Whole-kernel cutting thresher for canning-grade integrity.
  3. 3-4 t/h in line: hoister, feeder, husker, control cabinet.
  4. Wash-down design for daily wet-environment cleaning.
  5. Typical values throughout, configured to your variety.

Sample

Sample output from the Sweet Corn Husker and Thresher Machine. Ask us for real production photos matched to your exact product and capacity.

emergency

We are Here for You. Contact us Now

⏰ 7 * 24 Support
🔧 Remote Support
🌍 Global Coverage

Overview

A sweet corn husker and thresher machine prepares fresh corn for canning, freezing or kernel packing. The husker removes leaves and silk without damaging kernels; the thresher then cuts or strips kernels off the cob. On this page you will find both machines, their working principle, specifications, and how to pair them into a complete fresh corn processing line.

Sweet Corn Husker Machine: How It Works

The husking unit is a complete processing set of four parts: hoister, feeder, husker and electric control cabinet. The hoister lifts corn cobs with stepless speed regulation; the feeder aligns scattered cobs so they enter the husker in the best orientation; the husker peels leaves and stigma gently with a husking rate above 95% and a very low kernel breakage rate. It processes sweet corn, fresh corn and wet corn for corn cans, waxy corn food and frozen corn production.

Husker Specifications

ParameterValue
Model6YZJ-8
Capacity3-4 t/h (cobs in)
PowerHoister 1.5 kW, feeder 0.4 kW, husker 4.86 kW
Dimensions4560×1250×1800 mm
Husking rate>95%
FrameSUS 304 contact parts, movable wheels on hoister

Corn Thresher: Kernel from Cob

After husking, the thresher separates corn kernels from the central stem. The rotor adopts sweet corn kernel cutting technology with maize grain root cutting, so kernels come out whole rather than crushed , critical for canned and frozen kernel markets that pay by kernel integrity. Feeding is manual at the infeed hopper; the machine then completes threshing automatically.

Thresher Specifications

ParameterValue
ModelAMS368
Capacity500-600 kg/h (final corn seeds)
Power1 Hp + 1/2 Hp + 1/4 Hp + 1/4 Hp
Dimensions1320×620×1250 mm
Threshing degreeAdjustable by rotor speed
FrameStainless steel with movable wheels

Husker + Thresher = Fresh Corn Processing Line

Paired in line, the two machines process 3-4 t/h of field corn into clean, de-husked cobs, of which the thresher converts the desired share into kernels. Typical downstream equipment: bubble washer, blancher, and instant freezer for frozen kernel lines. Corn grain lines for flour or feed connect to our flour and rice milling equipment catalog instead.

Buying Tips: What to Check Before Ordering

  • Confirm your corn variety. Sweet corn, waxy corn and field corn differ in husk tightness; tell us the variety so we set roller gap accordingly.
  • Match thresher to end product. Whole kernels for canning need cutting-type threshers; crushed grain for paste can use simpler peg-tooth rotors.
  • Plan the wet environment. Both machines wash down daily; request sealed IP55 motors and food-grade belts for washdown zones.
  • Spare parts. Rollers and blades are wear parts; order one spare set with the machine to avoid a 3-week shipping gap in season.

FAQ

Combined husker-thresher units exist for small capacities below 1 t/h, but at 3-4 t/h two dedicated machines in series give a higher kernel integrity rate and are easier to clean. We recommend the two-machine layout for any plant running daily shifts.

Rule of thumb: 1 t of field cobs yields roughly 650-700 kg of husked cobs and 400-460 kg of kernels, depending on variety and moisture. The husker loses almost nothing; the thresher leaves the cob core behind.

Yes. Hoister, infeed elevator and discharge conveyors are quoted with the line so all heights and rates match , no on-site rework needed.

TAKE THE FIRST STEP. WE WILL DO THE REST.
Scroll to Top
small c popup.png

Get Your Production Line Plan Now

It will be sent to Boss and sales team directly.

1