Semi-Automatic Potato Crisps Production Line SPC Series
Semi-automatic crisps production for plants entering compound potato crisps: forming, frying, seasoning with manual loading between steps.
This site uses cookies for analytics and advertising. Accept them all, decline them all, or choose which ones you allow. Learn more in our privacy policy.
Semi-automatic crisps production for plants entering compound potato crisps: forming, frying, seasoning with manual loading between steps.






The SPC series produces ready-to-sell packed potato crisps (US: “chips”) at 30, 60, or 150 kg/h finished output. The 8-stage process — wash & peel → slice → blanch → dewater → fry → deoil → season → nitrogen-flush vacuum-pack — produces retail-quality crisps at 1.6–1.8 mm thickness with <2% residual oil.
Distinguished from french fries lines by the slicer (1.5–2.5 mm rotary vs 7–12 mm straight-cut), the fryer temperature (175°C vs 180°C), and the packaging (nitrogen-flush ambient-stable vs IQF frozen). SPC output is shelf-stable for 9–12 months at ambient — same retail channel as banana chips but different consumer-use case. Single-shift operation by 1–2 workers, ideal for retail-brand contract manufacturing, regional snack brands, and supermarket private-label programs where the buyer specifies crisp (not fry) format.
SPC-001 produces 60 kg/h finished crisps from approximately 105 kg/h raw potato input (1.75:1 ratio). The line measures 8.5 m × 1.4 m × 1.7 m and ships as 8 modules. Total installed power is 41 kW; the gas-fired fryer option reduces electric draw to 22 kW. *(typical range, configurable)*
The 0.75 kW rotary slicer produces 1.5–2.5 mm crisps at 80 slices/min, swappable for ripple-cut and crinkle-cut. The 21 kW electric fryer holds 175°C with continuous bottom-scraping; oil turnover 5–7% per hour. The packaging stage accepts BOPP/CPP and metallized-PET laminates with N₂ flush to <3% residual oxygen.
| Stage | Equipment | Power | Dimension (mm) |
|---|---|---|---|
| 1 — Wash & peel | Brush peeler | 0.75 kW / 220V | 690×430×860 |
| 2 — Slice | Rotary slicer | 0.75 kW / 220V | 650×510×700 |
| 3 — Blanch | Blancher | 15 kW / 380V | 1310×650×700 |
| 4 — Dewater | Centrifugal | 0.75 kW / 380V | 940×560×830 |
| 5 — Fry | Continuous fryer | 21 kW / 380V | 1380×620×950 |
| 6 — Deoil | Centrifugal | 0.75 kW / 380V | 940×560×830 |
| 7 — Season | Drum seasoning | 0.75 kW / 220V | 1000×800×1380 |
| 8 — Pack | Vacuum N₂ packer | 1 kW / 380V | 540×520×920 |
Same 8-stage architecture as SPC-001 with smaller-capacity modules. Total footprint 14 m², ideal for retail-brand private-label pilot and start-up snack manufacturers validating market demand before scaling. 220V single-phase available for stages 1–2, 6–8; 380V three-phase required for blancher, fryer.
Crisps are 1.5–2.5 mm slices at 175°C, nitrogen-flush packaged (ambient shelf life). French fries are 7–12 mm cuts at 180°C, IQF frozen — see the SFF french fries line. Compound (reconstituted) crisps are sheet-formed from potato powder on a separate compound potato chips line — SPC is slice-from-whole-potato only. Banana and plantain chips run on the BCL line. Hub: potato processing machines; the potato-chips application overview maps the whole category.
Atlantic, Snowden, and Hermes are industry-standard chipping varieties (high solids ≥20%, low reducing sugars for golden color). We provide a potato-variety compatibility matrix with the HACCP file.
Slice thickness, fryer temperature, and packaging differ. Crisps are 1.5–2.5 mm sliced at 175°C and nitrogen-flush packaged (ambient shelf life). French fries are 7–12 mm cut at 180°C and IQF frozen. The shared stages (wash, peel, blanch, fry, deoil) are similar; the differentiator stages justify separate lines.
No — that is a separate compound line (sheet-formed from potato powder). Our SPC line is slice-from-whole-potato only. See our compound potato chips line page for the reconstituted format.
Yes, with the vegetable-variety recipe pack. Beetroot requires shorter blanch (4 min vs 8 min); carrot requires pre-conditioning. Sweet potato crisps are a high-margin SKU.
30 days production + 18–35 days sea freight + 1 day on-site commissioning. Bilingual commissioning manual shipped with the line.
Daily: blade cleaning, fryer sediment removal. Weekly: slicer blade inspection (replace if nicked). Monthly: gearbox oil check. Yearly: blade block replacement, gearbox oil change, packaging seal-bar replacement.
