Industrial Vibrating Feeder
Vibratory feeder: evenly distributes product to downstream equipment.
This site uses cookies for analytics and advertising. Accept them all, decline them all, or choose which ones you allow. Learn more in our privacy policy.
Vibratory feeder: evenly distributes product to downstream equipment.




Sample output from the Industrial Vibrating Feeder. Ask us for real production photos matched to your exact product and capacity.




Vibrating feeders meter and spread product in an even single layer onto weighers, sorters and packers, 0.5-10 t/h.
| Model | Tray | Capacity | Power | Voltage | Weight | Drive |
|---|---|---|---|---|---|---|
| VBF-101 | 300 mm tray | 0.5–2 t/h | 0.2 kW | 220V | 85 kg | Electromagnetic, feed < 50 mm |
| VBF-701 | 500 mm tray | 5–7 t/h | 0.06 kW | 220V | 73 kg | Electromagnetic, 1.75 mm amplitude |
| VBF-201 | 800 mm pan | 10–50 t/h | up to 5 kW | 380V | 1,250 kg | Electromagnetic, adjustable stroke |
Weighing, sorting and inspection infeeds needing even single-layer product flow.
Two vibration motors create a linear motion that walks product forward along the trough, and a variable frequency drive adjusts the amplitude for stepless control of the rate. That gives repeatable dosing into scales, mixers, or process machines without gates or belts in the product path. Set it once per product and the feeder holds the rate, which is why it suits metering duty as well as plain transfer.
Granules, powders, chips, nuts, frozen vegetables, candy, pellets, and flakes all feed evenly. The trough is SUS304 stainless as standard, with optional PU or PTFE coating where product tends to stick. Because the motion is gentle, fragile pieces like chips and frozen dice arrive intact rather than crushed. Tell us your stickiest product and we will set the trough surface for it.
Yes, an optional screen deck mounts above the trough so oversize pieces and foreign lumps are scalped off while good product continues to the machine below. That turns a simple feeder into a two-in-one station, which saves floor space on tight lines. The screen section is removable for cleaning and for changing the aperture, so one deck swap covers different products.
Vibration meters product rather than just carrying it. The rate is set at the drive, product spreads evenly across the trough width, and there is no belt to trap residue or need tensioning. It also handles start-stop duty well, running at reduced amplitude when the downstream machine signals for less material. For dosing into a mixer, dryer, or grader, that control beats a plain belt.
The routine is a monthly check of the motor bearings and an annual replacement of the springs and grommets, the wear parts that isolate vibration from the frame. There are no belts, chains, or bearings in the product path, so the food-contact trough itself is a cleaning job rather than a maintenance item. Spares kits are inexpensive and worth holding on site.
Yes. We provide installation and commissioning support, and 12 months of after-sales service, including spare parts help and technical response.
