
Material Handling Equipment
We provide conveyors, elevators, silos, and feeders for food processing plant material transport.
This site uses cookies for analytics and advertising. Accept them all, decline them all, or choose which ones you allow. Learn more in our privacy policy.

We provide conveyors, elevators, silos, and feeders for food processing plant material transport.

Model: AIR-001. Click to view full specifications, FAQ, and quote.

Model: SILO-001. Click to view full specifications, FAQ, and quote.

Model: VBF-001. Click to view full specifications, FAQ, and quote.

Model: BEV-001. Click to view full specifications, FAQ, and quote.

Model: SCV-001. Click to view full specifications, FAQ, and quote.

Model: BCV-001. Click to view full specifications, FAQ, and quote.
Between every process step sits material handling: belt and screw conveyors, bucket elevators, vibrating feeders, air slides, and silos. Esper sizes them on real bulk density and throughput — not catalog guesses.
| Equipment | Best For | Avoid When |
|---|---|---|
| Belt conveyor (BCV) | Packaged goods, fragile product, inspection sections | Fine powders (spillage), steep inclines >18° |
| Screw conveyor (SCV) | Powders, granules, sticky meals | Friable product (degradation), long runs >6 m per screw |
| Bucket elevator (BEV) | Vertical lifts, grains, pellets | Sticky/hygroscopic materials (bucket buildup) |
| Vibrating feeder (VBF) | Metered dosing from hoppers | Dusty fines without covers |
| Air slide (AIR) | Fluidizable powders (flour, cement-like) | Moist product — kills air permeability |
| Silo (SILO) | Bulk storage, day bins | Without proper bin-flow design (arching, ratholing) |
Bulk density (loose vs tapped) and angle of repose decide everything: a ‘flour’ at 0.45 t/m³ loose and 0.72 tapped needs hopper walls at ≥60° from horizontal to arch-proof the outlet. We size conveyors at 80% of theoretical maximum — real plants always find ways to surge above nameplate.
Bin geometry by material flow properties (Jenike method): wall angle, outlet size, and vibration or aeration assist where marginal.
Plastic modular belt, minimal transfer drops (<300 mm), soft transitions — we specify by product fragility.
150-ribbed lactite belts or stainless slat, IP65 drives, lift-up frames for washdown.
Conveyors 0.5–100 t/h; elevators to 200 t/h; silos 5–500 m³. (typical range, configurable)
Yes — height/length to your layout; drop-in transfer points with matched speeds.
Enclosed screws and covers with central dust extraction tie-in on request.
