Industrial Air Slide Conveyor
Air slide: fluidized powder transport using low-pressure air through porous membrane.
This site uses cookies for analytics and advertising. Accept them all, decline them all, or choose which ones you allow. Learn more in our privacy policy.
Air slide: fluidized powder transport using low-pressure air through porous membrane.




Sample output from the Industrial Air Slide Conveyor. Ask us for real production photos matched to your exact product and capacity.




Air slide conveyors fluidize fine powder on a porous fabric bed for gentle enclosed horizontal transport from 5 to 150 t/h.
| Model | Chute | Capacity | Blower | Voltage | Weight | Layout |
|---|---|---|---|---|---|---|
| AIR-101 | 200–315 mm chute | 5–15 t/h | 4 kW | 380V | 120 kg/m | Fiber fluidized bed, 150 °C |
| AIR-701 | 400–500 mm chute | 15–50 t/h | 7.5 kW | 380V | 180 kg/m | Multi-channel canvas bed |
| AIR-201 | 500–800 mm chute | 50–150 t/h | 22 kW | 380V | 220 kg/m | Long-distance, Q235 steel frame |
Flour, cement and powder plants moving fine powder over long distances.
Low-pressure air passes through a porous membrane in the floor of an inclined trough, fluidizing the powder so it flows downhill like a liquid. There is no motor, screw, belt, or chain anywhere in the product path. That makes it quiet, low-energy, and nearly maintenance-free compared with mechanical conveying, which is why flour mills favor it for long horizontal runs. Capacity spans 1 to 30 t/h.
Fine, dry powders that fluidize freely are the target: flour, starch, and similar materials. Powders that are moist, oily, or coarse do not fluidize well and are better served by a screw or belt. If your material cakes with humidity, the membrane and the air supply need drying attention. Send us the powder and its moisture level and we will confirm suitability before you commit.
The trough runs at a gentle 4 to 8 degrees downward over its length, since gravity plus fluidization does the moving. That drop has to exist in your building: an 8-meter slide falls roughly half a meter or more from inlet to outlet. In practice the low profile fits under most existing equipment. We check the elevation drawing against the required fall before quoting.
A low-pressure blower, typically delivering around 0.02 to 0.05 MPa at 0.5 to 3 m3/min per meter of trough, depending on the powder and slide width. The air should be dry and filtered, because moisture in the supply is what blinds the membrane over time. One blower usually serves a complete slide section. We state the exact duty for your length at order stage.
A monthly clean of the porous membrane and a replacement roughly every two years under normal duty. The membrane is sintered PE or ceramic plate, replaceable in sections without replacing the trough. Watch the supply pressure gauge: a slow rise signals blinding before throughput suffers. Keeping the supply air dry is the single habit that stretches membrane life toward the top of its range.
Yes. We provide installation and commissioning support, and 12 months of after-sales service, including spare parts help and technical response.
