Industrial Bucket Elevator

Vertical bucket elevator: lifts product up to 30m.

Feature

  1. BEV-101 — 1 t/h: 5m lift. Small.
  2. BEV-001 — 15 t/h: 15m lift. Mid-scale.
  3. BEV-201 — 50 t/h: 30m lift. Industrial.
  4. Typical values throughout — configured to your line requirements.

Sample

Sample output from the Industrial Bucket Elevator. Ask us for real production photos matched to your exact product and capacity.

emergency

We are Here for You. Contact us Now

⏰ 7 * 24 Support
🔧 Remote Support
🌍 Global Coverage

Parameters

Vertical bucket elevator: lifts product up to 30m. 1-50 t/h. Food-grade plastic or steel buckets on belt or chain.

Model Range

ModelCapacityConfiguration
BEV-1011 t/h5m lift. Small.
BEV-00115 t/h15m lift. Mid-scale.
BEV-20150 t/h30m lift. Industrial.

Typical values — each model is configured to your product, cut size, and line speed.

Where It's Used

Plants lifting grain, powder, and granules vertically between levels. For the full range, see the processing hub.

FAQ

Belt drives run quieter and lighter, which suits grain, flour, sugar, and pellets. Chain drives are the heavier-duty choice for abrasive or rough material that would wear a belt. Buckets come in HDPE as the food-grade standard, nylon for abrasive loads, or steel for hot material. The decision follows your material more than your tonnage, so we match it to the actual product list.

Lift heights run from 3 to 30 meters, and multiple discharge points are available so one elevator can feed two floors or two separate processes. Capacity spans 1 to 50 t/h across the range. The casing is fully enclosed with an aspiration port for dust extraction, so even tall installations stay clean. Give us the floor drawing and we position the inlets and outlets to match.

Not dusty, because the buckets, belt, and product all travel inside a sealed casing. An aspiration port connects to your dust extraction system, keeping the interior at slight negative pressure and fines out of the room. That matters for flour and fine powders, where open lifting equipment would create both a hygiene issue and a housekeeping load. The enclosed design also quiets the machine.

Grain, flour, sugar, nuts, beans, pellets, and general powders lift well, and bucket handling is gentle enough that breakage stays low on fragile pieces like nuts. Bucket material and belt or chain choice follow the product: standard HDPE covers most food duty. If your material is abrasive or warm, we change the specification at order stage rather than leaving it to site modifications.

A monthly check of belt or chain tension, plus a quarterly inspection of the bucket bolts, covers the routine. Tension loss is the early warning sign on these machines, and catching it monthly avoids the tracking problems that follow. Bucket bolts are the safety-critical item, since a loose bolt lets a bucket strike the casing. Both checks are done from access doors without dismantling.

Yes. We provide installation and commissioning support, and 12 months of after-sales service, including spare parts help and technical response.

TAKE THE FIRST STEP. WE WILL DO THE REST.
Scroll to Top
small c popup.png

Get Your Production Line Plan Now

It will be sent to Boss and sales team directly.

1