Industrial Screw Conveyor
Screw conveyor: transports powder and granular material horizontally or at incline.
This site uses cookies for analytics and advertising. Accept them all, decline them all, or choose which ones you allow. Learn more in our privacy policy.
Screw conveyor: transports powder and granular material horizontally or at incline.




Sample output from the Industrial Screw Conveyor. Ask us for real production photos matched to your exact product and capacity.




Screw conveyors feed flour, starch, spice and granules up inclines in a sealed 114-219 mm stainless tube, from 0.5 to 15 t/h.
| Model | Tube | Capacity | Power | Voltage | Weight | Layout |
|---|---|---|---|---|---|---|
| SCV-101 | 114 mm tube | 0.5-2 t/h | 0.75 kW | 380V | 95 kg | 30-60 deg incline |
| SCV-701 | 168 mm tube | 2-6 t/h | 1.5 kW | 380V | 180 kg | U-trough, quick-open covers |
| SCV-201 | 219 mm tube | 6-15 t/h | 3 kW | 380V | 320 kg | Twin-hopper feeding station |
Bakery, spice and powder plants dosing and lifting raw material.
It suits flour, sugar, salt, grain, coffee beans, rice, and most powders and granules that flow reasonably well. Sticky or cohesive material is handled with a shaftless ribbon screw, which removes the center shaft where buildup starts. If your material is abrasive, an optional UHMWPE lining protects the tube. Send us a description with bulk density and we confirm the flight design.
Standard designs work from horizontal up to about 45 degrees, with the exact limit set by the material rather than the machine. Free-flowing granules tolerate steeper angles than fine, sticky flour, and steeper lifts need a changed flight design. The tube runs fully enclosed, so incline never creates dust or spillage. Tell us the material and the lift and we size the angle and screw together.
The screw runs inside a sealed SUS304 stainless tube, so material never meets open air between machines. That keeps dust out of the room, stops cross-contamination between batches, and meets food safety expectations for powder transfer. It also protects operators from airborne flour. Cleaning is through access ports and, on washdown configurations, full removal of the screw for scheduled inspection.
Capacity follows screw diameter and speed: a 100mm screw handles around 0.5 t/h for small powder duties, a 250mm screw around 10 t/h mid-scale, and a 400mm screw up to 30 t/h for industrial transfer. Running the screw on a variable drive lets you trim the rate to what the downstream process actually calls for. We size against your peak transfer, not your average.
Monthly lubrication of the bearings and an annual inspection of the screw and tube interior cover routine care. Because the parts list is short, with no belts or chains to tension, most plants find it one of the lowest-maintenance machines in the handling section. The annual visit is also when liner wear is measured, so abrasive duty is caught before it reaches the tube wall.
Yes. We provide installation and commissioning support, and 12 months of after-sales service, including spare parts help and technical response.
