Industrial Storage Silo

Food-grade storage silo: stores grain, flour, powder, or pellets.

Feature

  1. SILO-101 — 1-5 m3: Small ingredient silo.
  2. SILO-001 — 10-50 m3: Mid-scale. Level sensors + aeration.
  3. SILO-201 — 50-100 m3: Industrial. Multi-outlet + temperature monitoring.
  4. Typical values throughout — configured to your line requirements.

Sample

Sample output from the Industrial Storage Silo. Ask us for real production photos matched to your exact product and capacity.

emergency

We are Here for You. Contact us Now

⏰ 7 * 24 Support
🔧 Remote Support
🌍 Global Coverage

Parameters

Food-grade storage silo: stores grain, flour, powder, or pellets. 1-100 m3 capacity. SUS304 or food-grade painted steel with conical bottom.

Model Range

ModelCapacityConfiguration
SILO-1011-5 m3Small ingredient silo.
SILO-00110-50 m3Mid-scale. Level sensors + aeration.
SILO-20150-100 m3Industrial. Multi-outlet + temperature monitoring.

Typical values — each model is configured to your product, cut size, and line speed.

Where It's Used

Plants buffering grain, flour, and granular raw material in silos. For the full range, see the processing hub.

FAQ

Work from your consumption per shift and your delivery cadence. The range covers 1 to 100 m3, from small ingredient silos of a few cubic meters to industrial units with multiple outlets. A common planning rule is capacity for two to three days of production plus one full bulk delivery. Send us your daily usage and delivery size and we calculate the volume with discharge rate checked against it.

SUS304 stainless is the premium food-grade choice, standard where the interior is cleaned regularly or the material is moisture-sensitive. Hot-dip galvanized steel is the economic option for dry grain and pellet duty. Both use the same cone and outlet hardware. Hygiene-critical ingredient storage justifies stainless; bulk dry storage on a budget is where galvanized earns its place.

A 60-degree cone gives reliable gravity discharge for most food powders and granules, and the base adds bottom air injection that fluidizes material when flow slows. That combination clears bridges without an operator hammering the cone. Multiple outlets are optional where one silo feeds several lines. We match the cone and aeration to your actual material, not to a generic powder.

Capacitive or radar level probes give continuous level readings with high and low level alarms wired to your control room, so ordering and empty-running are both covered. On the larger models, multi-point temperature sensors watch stored grain for hot spots before they become spoilage. Those readings can be trended for stock control. Sensor checks are monthly and done from outside.

Monthly verification of the level sensors against a manual dip or sight check, and an annual interior inspection of coating and weld condition, cover it. Aeration components and discharge gates are checked on the same annual visit. Because a silo has no drive and no wear parts in the product path, the schedule is light compared with conveyors. Interior access is via a manhole under confined-space procedure.

Yes. We provide installation and commissioning support, and 12 months of after-sales service, including spare parts help and technical response.

TAKE THE FIRST STEP. WE WILL DO THE REST.
Scroll to Top
small c popup.png

Get Your Production Line Plan Now

It will be sent to Boss and sales team directly.

1